Every water pump leaves the engine plant with one part number. Then the aftermarket gets to work: the same casting reappears under the engine maker's number, the vehicle maker's number, two or three aftermarket brands' numbers and a fleet-internal code. By the time the pump reaches a buyer's spreadsheet, one physical unit can carry six identities.
Start from the number, not the photo
Two pumps can look identical in a photo and still differ in pulley height, impeller depth or thread spec. The OE number is the only reliable starting point. On this site, every page is keyed to one OE number, with its interchange set listed under it — if your number appears in that set, it is the same unit.
Mistake one: matching on engine model alone
"Fits NT855" is not a fitment guarantee. The same engine family ran different pumps across production years and applications. Engine model narrows the search; the OE number closes it.
Mistake two: ignoring suffixes
Trailing letters matter. A base number and its -A or -1 variant can differ in gasket kit or pulley offset. When you send an inquiry, send the full string exactly as printed, separators included — 8N5929 and 8N-5929 resolve to the same record here, but 613890 and 613890A may not.
When in doubt, measure
If the old pump is on the bench, three numbers settle most disputes: pulley height, impeller height, and the thread spec of the pump body. We publish these on each product page because they come off our inspection bench — match them against your old unit before ordering.
Send us your OE list — fitment confirmation and pricing back within one working day.