Massey Ferguson water pump
- Interchanges
- 02/100066 · 3118125R91 +9
- Engine
- —
Photos of the actual unit — the same pump we measure and pack.
02/201340 is a Massey Ferguson; Perkins water pump OE number. Our replacement matches the same mounting and cooling specs, fits 1004.4 engines, and ships with a 6.90 kg net weight (2 pcs per carton). Cross numbers: 02/200450, 02/200850, 02/201630, 3976.820, 4131E015 and 7 more.
You will find this pump on 1004.4.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 02/201340 |
| Fits brand | Massey Ferguson; Perkins |
| TO Shaft head height | 126 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 6-M8X1.25 |
| TO Gear height | 125.3 |
| TO Impeller height Ⅰ | 19.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 18 |
| Included Component 1 | O60X3.5-3 |
| Net weight | 6.90 kg |
| Packing | 2 pcs/ctn, 16.00 kg gross |
Packing runs 2 pumps per carton, 16.00 kg gross weight, carton size 43.5 x 30 x 21 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 02/201340 fit?
02/201340 fits 1004.4 engines. It is a Massey Ferguson; Perkins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 02/201340?
02/201340 interchanges with 02/200450, 02/200850, 02/201630, 3976.820, 4131E015, 473.724 and 6 more. All of these refer to the same water pump assembly.
How much does the 02/201340 water pump weigh?
One pump weighs 6.90 kg net. A full carton of 2 pieces comes to 16.00 kg gross.
What should I check before replacing the 02/201340 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.