Deutz water pump
- Interchanges
- 02937440 · 04206747 +6
- Engine
- BF4M1013
Photos of the actual unit — the same pump we measure and pack.
0425-9547 is the DEUTZ OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
The OE listing behind 0425-9547 does not name specific engines. Fitment is settled by the number — if your parts book or old pump shows 0425-9547, this is the same unit; the spec table below gives the mounting dimensions.
| Parameter | Value |
|---|---|
| OE number | 0425-9547 |
| Fits brand | DEUTZ |
| TO Shaft head height | 117 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 3-M8X1.25 |
| TO Flange height | 108.2 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 2 | O58.1X5.3 |
| Net weight | 1.90 kg |
| Packing | 4 pcs/ctn, 10.00 kg gross |
Depending on the catalog you use, the same pump shows up as:
Logistics data: 4 pcs/ctn, 10.00 kg gross, 46 x 40 x 21 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
How do I know 0425-9547 is the right pump?
Match 0425-9547 against the OE number on your old pump or in the parts book, then compare the dimensions in the spec table on this page. Our data does not list engine models for this number.
What other part numbers replace 0425-9547?
0425-9547 interchanges with 02937664, 4204095, 4801616, 6M1013. All of these refer to the same water pump assembly.
How much does the 0425-9547 water pump weigh?
One pump weighs 1.90 kg net. A full carton of 4 pieces comes to 10.00 kg gross.
What should I check before replacing the 0425-9547 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.