Isuzu water pump
- Interchanges
- 1-13650-057-0 · 1-13650112-6 +3
- Engine
- 6WA1
Photos of the actual unit — the same pump we measure and pack.
1-13610-603-3 is the Isuzu OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
This pump was designed for 6SA1.
Any engine on this list takes our replacement as a straight swap.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 1-13610-603-3 |
| Fits brand | Isuzu |
| TO Shaft head height | 146.3 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | R3/8-19 |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 138 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.9 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O70.6X5.3-2 |
| Net weight | 8.85 kg |
| Packing | 2 pcs/ctn, 19.70 kg gross |
For shipping estimates, count on 2 pumps per carton (19.70 kg, 51.5 x 29 x 26 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 1-13610-603-3 fit?
1-13610-603-3 fits 6SA1 engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1-13610-603-3?
1-13610-603-3 interchanges with 1-13610-842-1. All of these refer to the same water pump assembly.
How much does the 1-13610-603-3 water pump weigh?
One pump weighs 8.85 kg net. A full carton of 2 pieces comes to 19.70 kg gross.
What should I check before replacing the 1-13610-603-3 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.