Isuzu water pump
- Interchanges
- 1-13650-057-0
- Engine
- 6WA1 6WG1 6WG1T
Photos of the actual unit — the same pump we measure and pack.
1-13610-819-0 is how Isuzu lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 1-13610-017-1, 1-13610-428-0, 1-13610-602-1.
This pump was designed for 6BG1/FSR113; FOWARD; 6BG1; 81; 6BG1T; 5800cc; 6BD1.
If your engine tag matches any entry above, this pump is the right replacement.
One pump, many part numbers. The full cross list:
| Parameter | Value |
|---|---|
| OE number | 1-13610-819-0 |
| Fits brand | Isuzu |
| TO Shaft head height | 160.8 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 151.2 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1.6 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 6.58 kg |
| Packing | 2 pcs/ctn, 14.80 kg gross |
Each pump is packed individually; a master carton holds 2 pieces at 14.80 kg gross.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 1-13610-819-0 fit?
1-13610-819-0 fits 6BG1/FSR113, FOWARD and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1-13610-819-0?
1-13610-819-0 interchanges with 1-13610-017-1, 1-13610-428-0, 1-13610-602-1. All of these refer to the same water pump assembly.
How much does the 1-13610-819-0 water pump weigh?
One pump weighs 6.58 kg net. A full carton of 2 pieces comes to 14.80 kg gross.
What should I check before replacing the 1-13610-819-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.