Isuzu water pump
- Interchanges
- 8-97602781-0
- Engine
- 6HE1 4 SLOTS ROCKY
Photos of the actual unit — the same pump we measure and pack.
1-13650-008-1 is how Isuzu lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 1-13610-676-0, 1-13610-676-1, 1-13650-676-1.
The OE application list reads: 6SD1 R; R/K240.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
| Parameter | Value |
|---|---|
| OE number | 1-13650-008-1 |
| Fits brand | Isuzu |
| TO Belt pulley height | 140.9 |
| TO Shaft head height | 182.7 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | 6-M8X1.25 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O70.6X5.3-2 |
| Net weight | 14.00 kg |
| Packing | 1 pcs/ctn, 15.60 kg gross |
Logistics data: 1 pcs/ctn, 15.60 kg gross, 35 x 27 x 27 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 1-13650-008-1 fit?
1-13650-008-1 fits 6SD1 R and R/K240 engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1-13650-008-1?
1-13650-008-1 interchanges with 1-13610-676-0, 1-13610-676-1, 1-13650-676-1. All of these refer to the same water pump assembly.
How much does the 1-13650-008-1 water pump weigh?
One pump weighs 14.00 kg net. A full carton of 1 piece comes to 15.60 kg gross.
What should I check before replacing the 1-13650-008-1 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.