Isuzu water pump
- Interchanges
- 8-94393-447-3 · 8-94395-656-0 +1
- Engine
- 6HE1 two V-grooved pulley
Every unit is measured and leak-tested before packing.
The OE number 1-13650133-3 identifies a water pump fitted to 6HK1, Sany 375H and other listed engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 16.00 kg; a full carton holds 1.
Fitment covers 6HK1; Sany 375H; CX300C.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 1-13650133-3 |
| Fits brand | Isuzu; Case |
| TO Shaft head height | 208.1 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | M10X1.5 |
| Flange thread | 6-M10X1.25 |
| TO Flange height | 202.71 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.5 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 16.00 kg |
| Packing | 1 pcs/ctn, 18.00 kg gross |
Each pump is packed individually; a master carton holds 1 piece at 18.00 kg gross.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 1-13650133-3 fit?
1-13650133-3 fits 6HK1, Sany 375H and other listed engines. It is a Isuzu; Case application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1-13650133-3?
1-13650133-3 interchanges with 1-13650133-0, 1-13650133-2, 1-87813736-0, 1136501332, 437924A1, 60311177. All of these refer to the same water pump assembly.
How much does the 1-13650133-3 water pump weigh?
One pump weighs 16.00 kg net. A full carton of 1 piece comes to 18.00 kg gross.
What should I check before replacing the 1-13650133-3 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.