John Deere water pump
- Interchanges
- RE523828
- Engine
- PowerTech 6090 (9.0L)
Photos of the actual unit — the same pump we measure and pack.
129677-42001 is how John Deere; Yanmar lists this water pump. The same pump shows up as 129470-42001, 129470-42002, 129470-42003, MIA885116 in other catalogs.
This pump was designed for 4TNE98; 4JH110-YMI; 3TNV78.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 129677-42001 |
| Fits brand | John Deere; Yanmar |
| TO Shaft head height | 122 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M8X1.25 |
| Flange thread | 4-M6X1 |
| TO Flange height | 118 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.4 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O30X2 |
| Net weight | 1.82 kg |
| Packing | 4 pcs/ctn, 9.50 kg gross |
Depending on the catalog you use, the same pump shows up as:
Packing runs 4 pumps per carton, 9.50 kg gross weight, carton size 58 x 44 x 21 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 129677-42001 fit?
129677-42001 fits 4TNE98, 4JH110-YMI and other listed engines. It is a John Deere; Yanmar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 129677-42001?
129677-42001 interchanges with 129470-42001, 129470-42002, 129470-42003, MIA885116. All of these refer to the same water pump assembly.
How much does the 129677-42001 water pump weigh?
One pump weighs 1.82 kg net. A full carton of 4 pieces comes to 9.50 kg gross.
What should I check before replacing the 129677-42001 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.