Navistar water pump
- Interchanges
- 685155C92 · 685155C95 +1
- Engine
- International
Photos of the actual unit — the same pump we measure and pack.
138-4712 is how Navistar lists this water pump. The same pump shows up as 1815538C91 in other catalogs.
You will find this pump on 2554; 2654; 7100; 4900; S1954.
Match your engine model to the list and the pump will fit without rework.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 138-4712 |
| Fits brand | Navistar |
| TO Impeller height Ⅱ | 13.72 |
| TO Shaft head height | 172.1 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 6-3/8-16UNC |
| TO Flange height | 111.5 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 7.98 kg |
| Packing | 1 pcs/ctn, 10.00 kg gross |
Packing runs 1 pumps per carton, 10.00 kg gross weight, carton size 28 x 26 x 26 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 138-4712 fit?
138-4712 fits 2554, 2654 and other listed engines. It is a Navistar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 138-4712?
138-4712 interchanges with 1815538C91. All of these refer to the same water pump assembly.
How much does the 138-4712 water pump weigh?
One pump weighs 7.98 kg net. A full carton of 1 piece comes to 10.00 kg gross.
What should I check before replacing the 138-4712 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.