Perkins water pump
- Interchanges
- 145017960 · 3801345 +1
- Engine
- 403D-11
Photos of the actual unit — the same pump we measure and pack.
145017960 is how Perkins lists this water pump. It serves 403D-11 engines. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 3801345, U45011020, U45017961.
You will find this pump on 403D-11.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 145017960 |
| Fits brand | Perkins |
| TO Shaft head height | 111.9 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M6X1 |
| Flange thread | 4-M6X1 |
| TO Flange height | 103.9 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.6 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 1.10 kg |
| Packing | 8 pcs/ctn, 10.80 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
Each pump is packed individually; a master carton holds 8 pieces at 10.80 kg gross.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 145017960 fit?
145017960 fits 403D-11 engines. It is a Perkins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 145017960?
145017960 interchanges with 3801345, U45011020, U45017961. All of these refer to the same water pump assembly.
How much does the 145017960 water pump weigh?
One pump weighs 1.10 kg net. A full carton of 8 pieces comes to 10.80 kg gross.
What should I check before replacing the 145017960 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.