Hino water pump
- Interchanges
- 16100-2342 · 16100-2531 +1
- Engine
- W06D/FC166
Photos of the actual unit — the same pump we measure and pack.
Looking for 16100-2200? It is the Hino OE reference for a cooling water pump. The replacement we supply keeps the OE fit and pulley dimensions. Net weight 13.50 kg, packed 1 per carton.
The OE application list reads: OLD EK100.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 16100-2200 |
| Fits brand | Hino |
| TO Impeller height Ⅱ | 17.2 |
| TO Shaft head height | 97.8 |
| Mounting hole position | Aligned to OE mounting points |
| TO Gear height | 79.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 22 |
| Included Component 1 | O135X5-3 |
| Included Component 2 | O51X5-2 |
| Net weight | 13.50 kg |
| Packing | 1 pcs/ctn, 15.50 kg gross |
Packing runs 1 pumps per carton, 15.50 kg gross weight, carton size 38 x 30 x 27 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-2200 fit?
16100-2200 fits OLD EK100 engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
How much does the 16100-2200 water pump weigh?
One pump weighs 13.50 kg net. A full carton of 1 piece comes to 15.50 kg gross.
What should I check before replacing the 16100-2200 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 16100-2200 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.