Hino water pump
- Interchanges
- 16100-3301 · 16100-3302 +2
- Engine
- F20C F21C
Photos of the actual unit — the same pump we measure and pack.
16100-2304 belongs to the Hino cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 16100-2753, 16100-2833, 16100-3622, WP3330.
Fitment covers EP100; EM100.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 16100-2304 |
| Fits brand | Hino |
| TO Shaft head height | 52.9 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M10X1.5 |
| TO Impeller height Ⅰ | 0.4 |
| TO Gear height | 55.6 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 23 |
| Included Component 1 | O52X3.5-2 |
| Net weight | 9.60 kg |
| Packing | 2 pcs/ctn, 20.80 kg gross |
One pump, many part numbers. The full cross list:
Packing runs 2 pumps per carton, 20.80 kg gross weight, carton size 59 x 38 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-2304 fit?
16100-2304 fits EP100 and EM100 engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-2304?
16100-2304 interchanges with 16100-2753, 16100-2833, 16100-3622, WP3330. All of these refer to the same water pump assembly.
How much does the 16100-2304 water pump weigh?
One pump weighs 9.60 kg net. A full carton of 2 pieces comes to 20.80 kg gross.
What should I check before replacing the 16100-2304 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.