Every unit is measured and leak-tested before packing.
16100-3171 Water Pump — Hino Replacement
16100-3171 is the Hino OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
Which engines use the 16100-3171 water pump?
The OE listing behind 16100-3171 does not name specific engines. Fitment is settled by the number — if your parts book or old pump shows 16100-3171, this is the same unit; the spec table below gives the mounting dimensions.
What are the specifications of 16100-3171?
| Parameter | Value |
|---|---|
| OE number | 16100-3171 |
| Fits brand | Hino |
| TO Impeller height Ⅱ | 30.6 |
| TO Shaft head height | 111.2 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M10X1.5 |
| TO Flange height | 95.5 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.60 kg |
| Packing | 4 pcs/ctn, 17.00 kg gross |
Packing and quality checks
Each pump is packed individually; a master carton holds 4 pieces at 17.00 kg gross.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
Frequently asked questions
How do I know 16100-3171 is the right pump?
Match 16100-3171 against the OE number on your old pump or in the parts book, then compare the dimensions in the spec table on this page. Our data does not list engine models for this number.
How much does the 16100-3171 water pump weigh?
One pump weighs 3.60 kg net. A full carton of 4 pieces comes to 17.00 kg gross.
What should I check before replacing the 16100-3171 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 16100-3171 is the pump I need?
Send us a photo of the old pump and its nameplate, or the OE list from your parts book. We match it against 16100-3171 before you order.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The same four checks, every unit
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
Price this pump
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
- Sales desksales@hanchitradecn.com
- Trade deskBased in China, shipping worldwide
- Working hoursMon – Sat, 08:30 – 18:00 (GMT+8)
What comes back with the quote
- Unit price for OE 16100-3171 and any mixed items
- MOQ, carton data and container loading plan
- Photos of the actual unit before packing
- Lead time and suggested shipping method
Email us about OE 16100-3171
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.
- OE number(s) — a plain list is fine
- Quantity per item
- Destination port or country
- Packing, branding or target-price notes