Hino water pump
- Interchanges
- 16100-2393 · 16100-3462 +7
- Engine
- J08C (M10)
Photos of the actual unit — the same pump we measure and pack.
16100-3305 is how Hino lists this water pump. It serves F20C F21C engines. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 16100-3301, 16100-3302, 16100-3690, 161003063.
The OE application list reads: F20C F21C.
If your engine tag matches any entry above, this pump is the right replacement.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 16100-3305 |
| Fits brand | Hino |
| TO Shaft head height | 156.5 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M10X1.5 |
| TO Impeller height Ⅰ | 0.8 |
| TO Gear height | 143.7 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 32 |
| Included Component 1 | O122X3.5-3 |
| Net weight | 13.00 kg |
| Packing | 1 pcs/ctn, 14.30 kg gross |
Logistics data: 1 pcs/ctn, 14.30 kg gross, 36 x 32 x 22 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-3305 fit?
16100-3305 fits F20C F21C engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-3305?
16100-3305 interchanges with 16100-3301, 16100-3302, 16100-3690, 161003063. All of these refer to the same water pump assembly.
How much does the 16100-3305 water pump weigh?
One pump weighs 13.00 kg net. A full carton of 1 piece comes to 14.30 kg gross.
What should I check before replacing the 16100-3305 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.