Photos of the actual unit — the same pump we measure and pack.
16100-3475 Water Pump — Hino Replacement
16100-3475 is the Hino OE reference for this cooling water pump. One pump weighs 6.20 kg net; match the number against your old pump or parts book before ordering.
Which engines use the 16100-3475 water pump?
The OE application list reads: J05C.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
What are the specifications of 16100-3475?
| Parameter | Value |
|---|---|
| OE number | 16100-3475 |
| Fits brand | Hino |
| TO Shaft head height | 138.4 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | ZG3/4 |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 121.2 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O58X3.1 |
| Net weight | 6.20 kg |
| Packing | 2 pcs/ctn, 14.50 kg gross |
Packing and quality checks
Packing runs 2 pumps per carton, 14.50 kg gross weight, carton size 43.5 x 30 x 21 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
Frequently asked questions
What vehicles or engines does 16100-3475 fit?
16100-3475 fits J05C engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
How much does the 16100-3475 water pump weigh?
One pump weighs 6.20 kg net. A full carton of 2 pieces comes to 14.50 kg gross.
What should I check before replacing the 16100-3475 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 16100-3475 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send us the OE number and your engine model — we confirm fitment before you order.
The same four checks, every unit
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
Price this pump
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
- Sales desksales@hanchitradecn.com
- Trade deskBased in China, shipping worldwide
- Working hoursMon – Sat, 08:30 – 18:00 (GMT+8)
What comes back with the quote
- Unit price for OE 16100-3475 and any mixed items
- MOQ, carton data and container loading plan
- Photos of the actual unit before packing
- Lead time and suggested shipping method
Email us about OE 16100-3475
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.
- OE number(s) — a plain list is fine
- Quantity per item
- Destination port or country
- Packing, branding or target-price notes