Photos of the actual unit — the same pump we measure and pack.
16100-3781 Water Pump — Hino Replacement
16100-3781 is the Hino OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
Which engines use the 16100-3781 water pump?
Fitment covers P11C/FM2P; P11C-TK LFR-2P.
Match your engine model to the list and the pump will fit without rework.
What are the specifications of 16100-3781?
| Parameter | Value |
|---|---|
| OE number | 16100-3781 |
| Fits brand | Hino |
| TO Shaft head height | 122.9 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | RC1/2 |
| TO Impeller height Ⅰ | 0.5 |
| TO Gear height | 51.5 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 22 |
| Included Component 1 | O82X3.5 |
| Net weight | 9.80 kg |
| Packing | 2 pcs/ctn, 21.30 kg gross |
Packing and quality checks
Logistics data: 2 pcs/ctn, 21.30 kg gross, 59 x 38 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
Frequently asked questions
What vehicles or engines does 16100-3781 fit?
16100-3781 fits P11C/FM2P and P11C-TK LFR-2P engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
How much does the 16100-3781 water pump weigh?
One pump weighs 9.80 kg net. A full carton of 2 pieces comes to 21.30 kg gross.
What should I check before replacing the 16100-3781 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 16100-3781 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send us the OE number and your engine model — we confirm fitment before you order.
The same four checks, every unit
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
Price this pump
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
- Sales desksales@hanchitradecn.com
- Trade deskBased in China, shipping worldwide
- Working hoursMon – Sat, 08:30 – 18:00 (GMT+8)
What comes back with the quote
- Unit price for OE 16100-3781 and any mixed items
- MOQ, carton data and container loading plan
- Photos of the actual unit before packing
- Lead time and suggested shipping method
Email us about OE 16100-3781
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.
- OE number(s) — a plain list is fine
- Quantity per item
- Destination port or country
- Packing, branding or target-price notes