Hino water pump
- Interchanges
- 16100-1170 · 16100-1441 +2
- Engine
- EH700
Photos of the actual unit — the same pump we measure and pack.
16100-4120 is how Hino lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 16100-E0860.
This pump was designed for P11C SHANGHAI HINO FOR EXCAVATOR.
Match your engine model to the list and the pump will fit without rework.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 16100-4120 |
| Fits brand | Hino |
| TO Shaft head height | 104.9 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 5-M8X1.25 |
| Flange thread | 4-M10x1.25 |
| TO Flange height | 84.5 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O52X3.5 |
| Net weight | 9.25 kg |
| Packing | 2 pcs/ctn, 20.20 kg gross |
Logistics data: 2 pcs/ctn, 20.20 kg gross, 59 x 38 x 21 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-4120 fit?
16100-4120 fits P11C SHANGHAI HINO FOR EXCAVATOR engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-4120?
16100-4120 interchanges with 16100-E0860. All of these refer to the same water pump assembly.
How much does the 16100-4120 water pump weigh?
One pump weighs 9.25 kg net. A full carton of 2 pieces comes to 20.20 kg gross.
What should I check before replacing the 16100-4120 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.