Toyota water pump
- Interchanges
- 16100-78206-71 · 16110-78206-71 +1
- Engine
- 7F1DZ
Photos of the actual unit — the same pump we measure and pack.
16100-59065 is a Toyota water pump OE number. Our replacement matches the same mounting and cooling specs, fits 3400cc, 3B and other listed engines, and ships with a 4.46 kg net weight (4 pcs per carton). Cross numbers: 16100-59075, 16100-59076, GWT-109A.
You will find this pump on 3400cc; 3B; 3200cc; 2B DIESEL; GWT-109A.
Match your engine model to the list and the pump will fit without rework.
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
| Parameter | Value |
|---|---|
| OE number | 16100-59065 |
| Fits brand | Toyota |
| TO Shaft head height | 147 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | ZG1/2 |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 142.1 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 4.46 kg |
| Packing | 4 pcs/ctn, 22.00 kg gross |
For shipping estimates, count on 4 pumps per carton (22.00 kg, 59.5 x 51 x 25 cm).
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-59065 fit?
16100-59065 fits 3400cc, 3B and other listed engines. It is a Toyota application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-59065?
16100-59065 interchanges with 16100-59075, 16100-59076, GWT-109A. All of these refer to the same water pump assembly.
How much does the 16100-59065 water pump weigh?
One pump weighs 4.46 kg net. A full carton of 4 pieces comes to 22.00 kg gross.
What should I check before replacing the 16100-59065 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.