Hino water pump
- Interchanges
- 16100-2970 · 16100-2971 +5
- Engine
- H07D SEMI ASSY
Every unit is measured and leak-tested before packing.
16100-78101 is how Hino lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 16100-E0341.
This pump was designed for W06EW06D; DUTRO; W04DT.
If your engine tag matches any entry above, this pump is the right replacement.
One pump, many part numbers. The full cross list:
| Parameter | Value |
|---|---|
| OE number | 16100-78101 |
| Fits brand | Hino |
| TO Impeller height Ⅱ | 23.5 |
| TO Shaft head height | 88.1 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M8X1.25 |
| TO Flange height | 75.9 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.20 kg |
| Packing | 4 pcs/ctn, 14.80 kg gross |
For shipping estimates, count on 4 pumps per carton (14.80 kg, 38.5 x 32 x 16.5 cm).
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 16100-78101 fit?
16100-78101 fits W06EW06D, DUTRO and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-78101?
16100-78101 interchanges with 16100-E0341. All of these refer to the same water pump assembly.
How much does the 16100-78101 water pump weigh?
One pump weighs 3.20 kg net. A full carton of 4 pieces comes to 14.80 kg gross.
What should I check before replacing the 16100-78101 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.