Toyota water pump
- Interchanges
- 16100-59166 · 16100-59245 +1
- Engine
- 3000cc
Photos of the actual unit — the same pump we measure and pack.
16100-78200-71 belongs to the Toyota cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 16100-22060.
You will find this pump on 6FD15/25 1DZ.
Any engine on this list takes our replacement as a straight swap.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 16100-78200-71 |
| Fits brand | Toyota |
| TO Shaft head height | 119.5 |
| Mounting hole position | Aligned to OE mounting points |
| TO Flange height | 109.8 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 4 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 2.35 kg |
| Packing | 4 pcs/ctn, 11.50 kg gross |
Logistics data: 4 pcs/ctn, 11.50 kg gross, 58 x 44 x 21 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-78200-71 fit?
16100-78200-71 fits 6FD15/25 1DZ engines. It is a Toyota application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-78200-71?
16100-78200-71 interchanges with 16100-22060. All of these refer to the same water pump assembly.
How much does the 16100-78200-71 water pump weigh?
One pump weighs 2.35 kg net. A full carton of 4 pieces comes to 11.50 kg gross.
What should I check before replacing the 16100-78200-71 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.