Toyota water pump
- Interchanges
- 1610059175 · 1610059176
- Engine
- DYNA BU-60.70.83(TOYO ACE)
Photos of the actual unit — the same pump we measure and pack.
16100-78300-71 is the Toyota OE reference for this cooling water pump. One pump weighs 2.60 kg net; match the number against your old pump or parts book before ordering.
The OE application list reads: 1Z,2Z; 5FD25 6FD25/40 1Z.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 16100-78300-71 |
| Fits brand | Toyota |
| TO Shaft head height | 113 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | M16X1.5 |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 105 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O52X2.4 |
| Net weight | 2.60 kg |
| Packing | 4 pcs/ctn, 12.40 kg gross |
For shipping estimates, count on 4 pumps per carton (12.40 kg, 58 x 44 x 21 cm).
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 16100-78300-71 fit?
16100-78300-71 fits 1Z,2Z and 5FD25 6FD25/40 1Z engines. It is a Toyota application water pump, and our aftermarket unit replaces it directly.
How much does the 16100-78300-71 water pump weigh?
One pump weighs 2.60 kg net. A full carton of 4 pieces comes to 12.40 kg gross.
What should I check before replacing the 16100-78300-71 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 16100-78300-71 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.