Daihatsu water pump
- Interchanges
- 16100-87390 · 16100-87394
- Engine
- GWD-33A
Photos of the actual unit — the same pump we measure and pack.
16100-87390 belongs to the Daihatsu cooling system parts family. The pump sits on GWD-33A engines. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 16100-87391, 16100-87394.
The OE application list reads: GWD-33A.
If your engine tag matches any entry above, this pump is the right replacement.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 16100-87390 |
| Fits brand | Daihatsu |
| TO Shaft head height | 131.5 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M8X1.25 |
| TO Flange height | 162 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.12 kg |
| Packing | 4 pcs/ctn, 14.50 kg gross |
For shipping estimates, count on 4 pumps per carton (14.50 kg, 58 x 44 x 21 cm).
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 16100-87390 fit?
16100-87390 fits GWD-33A engines. It is a Daihatsu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-87390?
16100-87390 interchanges with 16100-87391, 16100-87394. All of these refer to the same water pump assembly.
How much does the 16100-87390 water pump weigh?
One pump weighs 3.12 kg net. A full carton of 4 pieces comes to 14.50 kg gross.
What should I check before replacing the 16100-87390 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.