Kubota water pump
- Interchanges
- 16239-73430 · 16241-73030 +8
- Engine
- V1505 With 68mm impeller
Photos of the actual unit — the same pump we measure and pack.
Looking for 16111-73030–2? It is the Kubota OE reference for a cooling water pump. The replacement we supply keeps the OE fit and pulley dimensions. Net weight 1.70 kg, packed 6 per carton.
This pump was designed for L295DT/L305.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 16111-73030–2 |
| Fits brand | Kubota |
| TO Belt pulley height | 49.3 |
| TO Impeller height Ⅱ | 21 |
| TO Shaft head height | 103.3 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | M6X1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 1.70 kg |
| Packing | 6 pcs/ctn, 12.50 kg gross |
For shipping estimates, count on 6 pumps per carton (12.50 kg, 56 x 34 x 31 cm).
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16111-73030–2 fit?
16111-73030–2 fits L295DT/L305 engines. It is a Kubota application water pump, and our aftermarket unit replaces it directly.
How much does the 16111-73030–2 water pump weigh?
One pump weighs 1.70 kg net. A full carton of 6 pieces comes to 12.50 kg gross.
What should I check before replacing the 16111-73030–2 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 16111-73030–2 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.