DAF water pump
- Interchanges
- 0683579 · 1 399 336 +1
- Engine
- XE250C
Photos of the actual unit — the same pump we measure and pack.
1644762 is how DAF lists this water pump. The same pump shows up as 1639196S1, 1653975S1, 1664762R, 1738991, 1742259S1 and 4 more in other catalogs.
You will find this pump on XFSeries12.9D05.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 1644762 |
| Fits brand | DAF |
| TO Belt pulley height | 32.2 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 61.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.10 kg |
| Packing | 4 pcs/ctn, 15.00 kg gross |
Depending on the catalog you use, the same pump shows up as:
Packing runs 4 pumps per carton, 15.00 kg gross weight, carton size 41 x 36 x 19.5 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 1644762 fit?
1644762 fits XFSeries12.9D05 engines. It is a DAF application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1644762?
1644762 interchanges with 1639196S1, 1653975S1, 1664762R, 1738991, 1742259S1, 1747963S1 and 3 more. All of these refer to the same water pump assembly.
How much does the 1644762 water pump weigh?
One pump weighs 3.10 kg net. A full carton of 4 pieces comes to 15.00 kg gross.
What should I check before replacing the 1644762 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.