Caterpillar water pump
- Interchanges
- 241-5989 · 2415989 +2
- Engine
- engine 3044c
Photos of the actual unit — the same pump we measure and pack.
1727775 is the Caterpillar OE reference for this cooling water pump. One pump weighs 12.30 kg net; match the number against your old pump or parts book before ordering.
Fitment covers 2P0661.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 1727775 |
| Fits brand | Caterpillar |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-3/8-16UNC |
| TO Gear height | 33.2 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 40 |
| Included Component 1 | O135X3.5 |
| Net weight | 12.30 kg |
| Packing | 1 pcs/ctn, 14.50 kg gross |
Logistics data: 1 pcs/ctn, 14.50 kg gross, 31 x 23 x 21 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 1727775 fit?
1727775 fits 2P0661 engines. It is a Caterpillar application water pump, and our aftermarket unit replaces it directly.
How much does the 1727775 water pump weigh?
One pump weighs 12.30 kg net. A full carton of 1 piece comes to 14.50 kg gross.
What should I check before replacing the 1727775 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 1727775 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.