Caterpillar water pump
- Interchanges
- 10R1669 · 2128177 +3
- Engine
- 3516
Photos of the actual unit — the same pump we measure and pack.
1786633 is the Caterpillar OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
This pump was designed for 3064, 3066 S6K; C4.2, C6; C6.4; 311C, 311D LRR; 312C, 312CL,312D.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 1786633 |
| Fits brand | Caterpillar |
| TO Impeller height Ⅱ | 26.4 |
| TO Shaft head height | 108 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M10X1.5 |
| TO Flange height | 97 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O110X2.4 |
| Net weight | 3.90 kg |
| Packing | 4 pcs/ctn, 16.80 kg gross |
Logistics data: 4 pcs/ctn, 16.80 kg gross, 38.5 x 32 x 16.5 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 1786633 fit?
1786633 fits 3064, 3066 S6K, C4.2, C6 and other listed engines. It is a Caterpillar application water pump, and our aftermarket unit replaces it directly.
How much does the 1786633 water pump weigh?
One pump weighs 3.90 kg net. A full carton of 4 pieces comes to 16.80 kg gross.
What should I check before replacing the 1786633 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 1786633 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.