Yanmar water pump
- Interchanges
- 119540-42001 · 13-2270
- Engine
- 3YM20
Photos of the actual unit — the same pump we measure and pack.
1932742100 is how Yanmar lists this water pump. The same pump shows up as 121000-42100 in other catalogs.
You will find this pump on 3d75.
Any engine on this list takes our replacement as a straight swap.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 1932742100 |
| Fits brand | Yanmar |
| TO Shaft head height | 105.9 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M6X1 |
| TO Flange height | 99.4 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.68 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 0.76 kg |
| Packing | 8 pcs/ctn, 8.10 kg gross |
Logistics data: 8 pcs/ctn, 8.10 kg gross, 38.5 x 32 x 31.5 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 1932742100 fit?
1932742100 fits 3d75 engines. It is a Yanmar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1932742100?
1932742100 interchanges with 121000-42100. All of these refer to the same water pump assembly.
How much does the 1932742100 water pump weigh?
One pump weighs 0.76 kg net. A full carton of 8 pieces comes to 8.10 kg gross.
What should I check before replacing the 1932742100 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.