Nissan water pump
- Interchanges
- 21008-96072 · 21010-96011 +4
- Engine
- PF6T
Photos of the actual unit — the same pump we measure and pack.
21010-78202 is how Nissan lists this water pump. It serves H20 engines. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 21010-66028, 21010-78200, 21010-78203, 21010-78225, 21010-78226 and 4 more.
Fitment covers H20.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 21010-78202 |
| Fits brand | Nissan |
| TO Shaft head height | 125.52 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M6X1 |
| TO Flange height | 118.81 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1.92 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 1.60 kg |
| Packing | 8 pcs/ctn, 15.00 kg gross |
Depending on the catalog you use, the same pump shows up as:
Logistics data: 8 pcs/ctn, 15.00 kg gross, 40.8 x 36 x 38.5 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 21010-78202 fit?
21010-78202 fits H20 engines. It is a Nissan application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 21010-78202?
21010-78202 interchanges with 21010-66028, 21010-78200, 21010-78203, 21010-78225, 21010-78226, 21010-J5025 and 3 more. All of these refer to the same water pump assembly.
How much does the 21010-78202 water pump weigh?
One pump weighs 1.60 kg net. A full carton of 8 pieces comes to 15.00 kg gross.
What should I check before replacing the 21010-78202 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.