Nissan water pump
- Interchanges
- 21010-96129 · 21010-97229 +5
- Engine
- RG8 FE6T/
Photos of the actual unit — the same pump we measure and pack.
21010-96264 belongs to the Nissan cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 21008-96107, 21010-96172, 21010-97572, A2018.
You will find this pump on PD6; PE6; PE6T.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 21010-96264 |
| Fits brand | Nissan |
| TO Shaft head height | 184.2 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 4-M8X1.25 |
| TO Impeller height Ⅰ | 9.8 |
| TO Gear height | 180.1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 20 |
| Net weight | 7.55 kg |
| Packing | 2 pcs/ctn, 16.70 kg gross |
Each pump is packed individually; a master carton holds 2 pieces at 16.70 kg gross.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 21010-96264 fit?
21010-96264 fits PD6, PE6 and other listed engines. It is a Nissan application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 21010-96264?
21010-96264 interchanges with 21008-96107, 21010-96172, 21010-97572, A2018. All of these refer to the same water pump assembly.
How much does the 21010-96264 water pump weigh?
One pump weighs 7.55 kg net. A full carton of 2 pieces comes to 16.70 kg gross.
What should I check before replacing the 21010-96264 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.