Perkins water pump
- Interchanges
- 13243 · 2030-35 +2
- Engine
- TRACTORS
Photos of the actual unit — the same pump we measure and pack.
239-6142 is the Perkins OE reference for this cooling water pump. One pump weighs 8.00 kg net; match the number against your old pump or parts book before ordering.
The OE listing behind 239-6142 does not name specific engines. Fitment is settled by the number — if your parts book or old pump shows 239-6142, this is the same unit; the spec table below gives the mounting dimensions.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 239-6142 |
| Fits brand | Perkins |
| TO Shaft head height | 123.1 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | M8X1.25 |
| TO Gear height | 109.2 |
| TO Impeller height Ⅰ | 12.3 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 19 |
| Net weight | 8.00 kg |
| Packing | 2 pcs/ctn, 18.00 kg gross |
Logistics data: 2 pcs/ctn, 18.00 kg gross, 51.5 x 29 x 26 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
How do I know 239-6142 is the right pump?
Match 239-6142 against the OE number on your old pump or in the parts book, then compare the dimensions in the spec table on this page. Our data does not list engine models for this number.
What other part numbers replace 239-6142?
239-6142 interchanges with U5MW0196. All of these refer to the same water pump assembly.
How much does the 239-6142 water pump weigh?
One pump weighs 8.00 kg net. A full carton of 2 pieces comes to 18.00 kg gross.
What should I check before replacing the 239-6142 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.