Kubota water pump
- Interchanges
- 17462-72702
- Engine
- Water house 4 hills
Photos of the actual unit — the same pump we measure and pack.
25-34935-00 is how Kubota lists this water pump. It serves Carrier, D782 D902 and other listed engines. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 15443-73034, 15852-73030, 1G820-73035.
You will find this pump on Carrier; D782 D902; D950; big.
If your engine tag matches any entry above, this pump is the right replacement.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 25-34935-00 |
| Fits brand | Kubota |
| TO Impeller height Ⅱ | 9.3 |
| TO Shaft head height | 72 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M6X1 |
| TO Flange height | 65.5 |
| Flange jumping | 0.07 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 0.66 kg |
| Packing | 12 pcs/ctn, 9.90 kg gross |
For shipping estimates, count on 12 pumps per carton (9.90 kg, 43.5 x 26.8 x 30.3 cm).
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 25-34935-00 fit?
25-34935-00 fits Carrier, D782 D902 and other listed engines. It is a Kubota application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 25-34935-00?
25-34935-00 interchanges with 15443-73034, 15852-73030, 1G820-73035. All of these refer to the same water pump assembly.
How much does the 25-34935-00 water pump weigh?
One pump weighs 0.66 kg net. A full carton of 12 pieces comes to 9.90 kg gross.
What should I check before replacing the 25-34935-00 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.