Kubota water pump
- Interchanges
- 16239-73430 · 16241-73032 +5
- Engine
- V1505 With 68mm impeller
Photos of the actual unit — the same pump we measure and pack.
Looking for 25-36670-00? It is the Kubota OE reference for a cooling water pump. The replacement we supply keeps the OE fit and pulley dimensions. Net weight 0.66 kg, packed 12 per carton.
This pump was designed for D850; D950; V1100; small; Carrier.
If your engine tag matches any entry above, this pump is the right replacement.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 25-36670-00 |
| Fits brand | Kubota |
| TO Impeller height Ⅱ | 9.5 |
| TO Shaft head height | 84.5 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M6X1 |
| TO Flange height | 79.6 |
| Flange jumping | 0.07 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 0.66 kg |
| Packing | 12 pcs/ctn, 9.90 kg gross |
Logistics data: 12 pcs/ctn, 9.90 kg gross, 43.5 x 26.8 x 30.3 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 25-36670-00 fit?
25-36670-00 fits D850, D950 and other listed engines. It is a Kubota application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 25-36670-00?
25-36670-00 interchanges with 15534-73030, 15552-73033, 15852-73030, 1G820-73035, 29-70052-00, 6652753. All of these refer to the same water pump assembly.
How much does the 25-36670-00 water pump weigh?
One pump weighs 0.66 kg net. A full carton of 12 pieces comes to 9.90 kg gross.
What should I check before replacing the 25-36670-00 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.