Mitsubishi water pump
- Interchanges
- GWM-33A · ME013406 +8
- Engine
- GWM-33A 4D30(T)
Photos of the actual unit — the same pump we measure and pack.
The OE number 25100-93210 identifies a water pump fitted to D6BR and Hyundai AEROTOWN HD120 engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 8.70 kg; a full carton holds 2.
Fitment covers D6BR; Hyundai AEROTOWN HD120.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 25100-93210 |
| Fits brand | Mitsubishi; Hyundai |
| TO Belt pulley height | 119.84 |
| TO Impeller height Ⅱ | 6 |
| TO Shaft head height | 146.6 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | M10X1.25 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 8.70 kg |
| Packing | 2 pcs/ctn, 18.90 kg gross |
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
Logistics data: 2 pcs/ctn, 18.90 kg gross, 43.5 x 30 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 25100-93210 fit?
25100-93210 fits D6BR and Hyundai AEROTOWN HD120 engines. It is a Mitsubishi; Hyundai application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 25100-93210?
25100-93210 interchanges with 25100-93110, 25100-93120, ME065183. All of these refer to the same water pump assembly.
How much does the 25100-93210 water pump weigh?
One pump weighs 8.70 kg net. A full carton of 2 pieces comes to 18.90 kg gross.
What should I check before replacing the 25100-93210 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.