Isuzu water pump
- Interchanges
- 5-13610-009-0 · 5-13610-027-0 +3
- Engine
- 4BA1
Photos of the actual unit — the same pump we measure and pack.
Looking for 2723555? It is the Isuzu OE reference for a cooling water pump used on Thermo King, SB100 and other listed engines. The replacement we supply keeps the same fit and pulley dimensions. Net weight 2.65 kg, packed 4 per carton.
You will find this pump on Thermo King; SB100; SB190; D201.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 2723555 |
| Fits brand | Isuzu |
| TO Impeller height Ⅱ | 22.6 |
| TO Shaft head height | 98.4 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M8X1.25 |
| TO Flange height | 82.3 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O95X3.5-3 |
| Net weight | 2.65 kg |
| Packing | 4 pcs/ctn, 12.60 kg gross |
Each pump is packed individually; a master carton holds 4 pieces at 12.60 kg gross.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 2723555 fit?
2723555 fits Thermo King, SB100 and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
How much does the 2723555 water pump weigh?
One pump weighs 2.65 kg net. A full carton of 4 pieces comes to 12.60 kg gross.
What should I check before replacing the 2723555 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 2723555 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.