Kubota water pump
- Interchanges
- 1G489-73030 · 1G489-73033 +2
- Engine
- V2403 with pipe
Photos of the actual unit — the same pump we measure and pack.
29-70183-00 is how Kubota lists this water pump. The same pump shows up as 16239-73430, 16241-73030, 16241-73034, 16251-73037, 25-15425-00 in other catalogs.
You will find this pump on V1505 58mm; V1305; V1405; D905 D1005; D1005-58; Carrier.
If your engine tag matches any entry above, this pump is the right replacement.
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
| Parameter | Value |
|---|---|
| OE number | 29-70183-00 |
| Fits brand | Kubota |
| TO Impeller height Ⅱ | 13.6 |
| TO Shaft head height | 93.4 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M6X1 |
| TO Flange height | 82 |
| Flange jumping | 0.07 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 0.86 kg |
| Packing | 8 pcs/ctn, 8.88 kg gross |
Packing runs 8 pumps per carton, 8.88 kg gross weight, carton size 38.5 x 32 x 31.5 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 29-70183-00 fit?
29-70183-00 fits V1505 58mm, V1305 and other listed engines. It is a Kubota application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 29-70183-00?
29-70183-00 interchanges with 16239-73430, 16241-73030, 16241-73034, 16251-73037, 25-15425-00. All of these refer to the same water pump assembly.
How much does the 29-70183-00 water pump weigh?
One pump weighs 0.86 kg net. A full carton of 8 pieces comes to 8.88 kg gross.
What should I check before replacing the 29-70183-00 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.