JCB water pump
- Interchanges
- 320/B4744 · 32004542 +1
- Engine
- JCB210
Photos of the actual unit — the same pump we measure and pack.
32004542 is the JCB OE reference for this cooling water pump. One pump weighs 3.65 kg net; match the number against your old pump or parts book before ordering.
You will find this pump on JCB210; JCB130; Jcb444.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 32004542 |
| Fits brand | JCB |
| TO Belt pulley height | 65.7 |
| TO Impeller height Ⅱ | 36.4 |
| TO Shaft head height | 69.5 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.65 kg |
| Packing | 4 pcs/ctn, 16.60 kg gross |
One pump, many part numbers. The full cross list:
Logistics data: 4 pcs/ctn, 16.60 kg gross, 41 x 36 x 19.5 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 32004542 fit?
32004542 fits JCB210, JCB130 and other listed engines. It is a JCB application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 32004542?
32004542 interchanges with 320/04542, 320/B4744, 320A4904. All of these refer to the same water pump assembly.
How much does the 32004542 water pump weigh?
One pump weighs 3.65 kg net. A full carton of 4 pieces comes to 16.60 kg gross.
What should I check before replacing the 32004542 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.