Cummins water pump
- Interchanges
- 2882044 · 3959582 +9
- Engine
- PC300-8
Photos of the actual unit — the same pump we measure and pack.
3286277 belongs to the Cummins cooling system parts family. The pump sits on 6BT, S6D102E and other listed engines. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 3286278, 3802358, 6231-62-1100, 6735-61-1101, 6735-61-1102 and 2 more.
The OE application list reads: 6BT; S6D102E; PC200-6/7.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 3286277 |
| Fits brand | Cummins |
| TO Belt pulley height | 87 |
| TO Impeller height Ⅱ | 28.4 |
| TO Shaft head height | 103.2 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O95.6X5.3 |
| Net weight | 2.60 kg |
| Packing | 8 pcs/ctn, 22.80 kg gross |
Depending on the catalog you use, the same pump shows up as:
Each pump is packed individually; a master carton holds 8 pieces at 22.80 kg gross.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 3286277 fit?
3286277 fits 6BT, S6D102E and other listed engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 3286277?
3286277 interchanges with 3286278, 3802358, 6231-62-1100, 6735-61-1101, 6735-61-1102, 6735-61-1502 and 1 more. All of these refer to the same water pump assembly.
How much does the 3286277 water pump weigh?
One pump weighs 2.60 kg net. A full carton of 8 pieces comes to 22.80 kg gross.
What should I check before replacing the 3286277 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.