Perkins water pump
- Interchanges
- 145010060 · 145017780 +2
- Engine
- Perkins 14mm pipe
Every unit is measured and leak-tested before packing.
3552252 is a Perkins water pump OE number. Our replacement matches the same mounting and cooling specs, fits C4.4 engines, and ships with a 5.10 kg net weight (2 pcs per carton). Cross numbers: 4131A038, 4131A081, 4226667M91, U5MW0197, U5MW0201 and 2 more.
The OE application list reads: C4.4.
Match your engine model to the list and the pump will fit without rework.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 3552252 |
| Fits brand | Perkins |
| TO Impeller height Ⅱ | 7.6 |
| TO Shaft head height | 85.8 |
| Mounting hole position | Aligned to OE mounting points |
| TO Gear height | 72 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 5.10 kg |
| Packing | 2 pcs/ctn, 12.00 kg gross |
Logistics data: 2 pcs/ctn, 12.00 kg gross, 34.2 x 27.2 x 33.5 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 3552252 fit?
3552252 fits C4.4 engines. It is a Perkins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 3552252?
3552252 interchanges with 4131A038, 4131A081, 4226667M91, U5MW0197, U5MW0201, U5MW0207 and 1 more. All of these refer to the same water pump assembly.
How much does the 3552252 water pump weigh?
One pump weighs 5.10 kg net. A full carton of 2 pieces comes to 12.00 kg gross.
What should I check before replacing the 3552252 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.