Mitsubishi water pump
- Interchanges
- ME095657 · ME995121 +2
- Engine
- 8DC9 FV415
Photos of the actual unit — the same pump we measure and pack.
37545-00051 belongs to the Mitsubishi cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 37501-42100, 37545-30010, 37745-60010.
Fitment covers S6R2; S16R; S12Rengines.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 37545-00051 |
| Fits brand | Mitsubishi |
| TO Belt pulley height | 291.1 |
| TO Shaft head height | 289 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 19.7 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O100X3.1-2 |
| Included Component 2 | O18X2.4 |
| Included Component 3 | O28X3.1 |
| Net weight | 24.40 kg |
| Packing | 1 pcs/ctn, 27.00 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
For shipping estimates, count on 1 pumps per carton (27.00 kg, 37 x 30 x 40 cm).
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 37545-00051 fit?
37545-00051 fits S6R2, S16R and other listed engines. It is a Mitsubishi application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 37545-00051?
37545-00051 interchanges with 37501-42100, 37545-30010, 37745-60010. All of these refer to the same water pump assembly.
How much does the 37545-00051 water pump weigh?
One pump weighs 24.40 kg net. A full carton of 1 piece comes to 27.00 kg gross.
What should I check before replacing the 37545-00051 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.