Cummins water pump
- Interchanges
- 4376359 · 5291445 +4
- Engine
- 6D114/6CT
Photos of the actual unit — the same pump we measure and pack.
3801788 is a Cummins water pump OE number. Our replacement matches the same mounting and cooling specs and ships with a 10.20 kg net weight (2 pcs per carton). Cross numbers: 3801708.
Fitment covers NT855; NTA855.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 3801788 |
| Fits brand | Cummins |
| TO Belt pulley height | 86.8 |
| TO Impeller height Ⅱ | 30 |
| TO Shaft head height | 85.5 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-1/2-20UNF |
| Belt pulley thread | 2-3/8-16UNC |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O44.6X3.55 |
| Net weight | 10.20 kg |
| Packing | 2 pcs/ctn, 23.40 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
Packing runs 2 pumps per carton, 23.40 kg gross weight, carton size 59 x 38 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 3801788 fit?
3801788 fits NT855 and NTA855 engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 3801788?
3801788 interchanges with 3801708. All of these refer to the same water pump assembly.
How much does the 3801788 water pump weigh?
One pump weighs 10.20 kg net. A full carton of 2 pieces comes to 23.40 kg gross.
What should I check before replacing the 3801788 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.