Cummins water pump
- Interchanges
- 3800984
- Engine
- With aluminium impeller
Every unit is measured and leak-tested before packing.
The OE number 3903749 identifies a water pump fitted to FD 1060, 4LE1 and other listed engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 2.68 kg; a full carton holds 8.
The OE application list reads: FD 1060; 4LE1; 6D102; BUS; PC200-6.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 3903749 |
| Fits brand | Cummins |
| TO Belt pulley height | 87 |
| TO Impeller height Ⅱ | 27.4 |
| TO Shaft head height | 103.2 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O95.6X5.3 |
| Net weight | 2.68 kg |
| Packing | 8 pcs/ctn, 23.44 kg gross |
Each pump is packed individually; a master carton holds 8 pieces at 23.44 kg gross.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 3903749 fit?
3903749 fits FD 1060, 4LE1 and other listed engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 3903749?
3903749 interchanges with 3282677, 3802004, 3802358, 3802970, 6735-61-1501. All of these refer to the same water pump assembly.
How much does the 3903749 water pump weigh?
One pump weighs 2.68 kg net. A full carton of 8 pieces comes to 23.44 kg gross.
What should I check before replacing the 3903749 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.