Mercedes Benz water pump
- Interchanges
- A4702000101 · A4702000301 +6
- Engine
- —
Photos of the actual unit — the same pump we measure and pack.
4572000101 is the Mercedes Benz OE reference for this cooling water pump. One pump weighs 9.93 kg net; match the number against your old pump or parts book before ordering.
Fitment covers MERCEDES.MAN 401.445.442; OM477A; OM447L; OM449A; OM449L.
Match your engine model to the list and the pump will fit without rework.
One pump, many part numbers. The full cross list:
| Parameter | Value |
|---|---|
| OE number | 4572000101 |
| Fits brand | Mercedes Benz |
| TO Impeller height Ⅱ | 21.3 |
| TO Shaft head height | 100 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 6-M8X1.25 |
| TO Flange height | 90.9 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O67X4-1 |
| Net weight | 9.93 kg |
| Packing | 2 pcs/ctn, 21.80 kg gross |
Logistics data: 2 pcs/ctn, 21.80 kg gross, 59 x 38 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 4572000101 fit?
4572000101 fits MERCEDES.MAN 401.445.442, OM477A and other listed engines. It is a Mercedes Benz application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 4572000101?
4572000101 interchanges with 403 200 4401, 403 200 5101, 403 200 7101, 457 200 0101, 4572000201, 5000281838. All of these refer to the same water pump assembly.
How much does the 4572000101 water pump weigh?
One pump weighs 9.93 kg net. A full carton of 2 pieces comes to 21.80 kg gross.
What should I check before replacing the 4572000101 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.