Isuzu water pump
- Interchanges
- 1-13610-877-0 · 1-13610877-2 +6
- Engine
- 6BG1 6BG1T low house IS4BG/
Photos of the actual unit — the same pump we measure and pack.
5-13610-038-1 belongs to the Isuzu cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 11-4576, 5-13610-179-0, 8-94376-832-0, 9-13610-323-0, 9-13610-417-0 and 2 more.
You will find this pump on C240; C201; GWIS-10A; Thermo King.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 5-13610-038-1 |
| Fits brand | Isuzu |
| TO Shaft head height | 118 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | ZG3/8-19 |
| Flange thread | 4-M6X1 |
| TO Flange height | 107.5 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.80 kg |
| Packing | 4 pcs/ctn, 17.20 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
Logistics data: 4 pcs/ctn, 17.20 kg gross, 56 x 34 x 19 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 5-13610-038-1 fit?
5-13610-038-1 fits C240, C201 and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 5-13610-038-1?
5-13610-038-1 interchanges with 11-4576, 5-13610-179-0, 8-94376-832-0, 9-13610-323-0, 9-13610-417-0, 9-13617-605-0 and 1 more. All of these refer to the same water pump assembly.
How much does the 5-13610-038-1 water pump weigh?
One pump weighs 3.80 kg net. A full carton of 4 pieces comes to 17.20 kg gross.
What should I check before replacing the 5-13610-038-1 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.