Isuzu water pump
- Interchanges
- 1-13650133-0 · 1-13650133-2 +4
- Engine
- 6HK1
Photos of the actual unit — the same pump we measure and pack.
5-87311242-0 is the Isuzu OE reference for this cooling water pump. One pump weighs 8.83 kg net; match the number against your old pump or parts book before ordering.
Fitment covers 4HK1 NEW.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 5-87311242-0 |
| Fits brand | Isuzu |
| TO Impeller height Ⅱ | 6.7 |
| TO Shaft head height | 158 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 6-M10X1.25 |
| TO Flange height | 146.65 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 8.83 kg |
| Packing | 2 pcs/ctn, 19.66 kg gross |
Each pump is packed individually; a master carton holds 2 pieces at 19.66 kg gross.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 5-87311242-0 fit?
5-87311242-0 fits 4HK1 NEW engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
How much does the 5-87311242-0 water pump weigh?
One pump weighs 8.83 kg net. A full carton of 2 pieces comes to 19.66 kg gross.
What should I check before replacing the 5-87311242-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 5-87311242-0 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.