Renault water pump
- Interchanges
- 0987045200 · 2730180 +3
- Engine
- —
Photos of the actual unit — the same pump we measure and pack.
5001837298 is a Renault water pump OE number. Our replacement matches the same mounting and cooling specs and ships with a 3.52 kg net weight (4 pcs per carton). Cross numbers: 5000670157, 5000681283.
The OE application list reads: C210-CLR220; C230-C260; C280-C290; C300-CCH300; C340T1; G210-G220; R312-G320; R312-G330.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 5001837298 |
| Fits brand | Renault |
| Mounting hole position | Aligned to OE mounting points |
| TO Gear height | 49.5 |
| TO Impeller height Ⅰ | 50.1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 27 |
| Included Component 1 | O122X3.5-3 |
| Included Component 2 | O99.6X3.55-3 |
| Net weight | 3.52 kg |
| Packing | 4 pcs/ctn, 16.10 kg gross |
Depending on the catalog you use, the same pump shows up as:
Packing runs 4 pumps per carton, 16.10 kg gross weight, carton size 38.5 x 32 x 16.5 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 5001837298 fit?
5001837298 fits C210-CLR220, C230-C260 and other listed engines. It is a Renault application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 5001837298?
5001837298 interchanges with 5000670157, 5000681283. All of these refer to the same water pump assembly.
How much does the 5001837298 water pump weigh?
One pump weighs 3.52 kg net. A full carton of 4 pieces comes to 16.10 kg gross.
What should I check before replacing the 5001837298 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.