Iveco water pump
- Interchanges
- 5001859590 · 504201935 +4
- Engine
- iveco
Photos of the actual unit — the same pump we measure and pack.
5001859590 is a IVECO water pump OE number. Our replacement matches the same mounting and cooling specs, fits iveco engines, and ships with a 3.88 kg net weight (4 pcs per carton). Cross numbers: 504201935, 504361543, 5801931331, 926371, 99460305 and 1 more.
Fitment covers iveco.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 5001859590 |
| Fits brand | IVECO |
| TO Belt pulley height | 48.5 |
| TO Impeller height Ⅱ | 59 |
| TO Shaft head height | 72.8 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M8X1.25 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O120X4-1 |
| Net weight | 3.88 kg |
| Packing | 4 pcs/ctn, 17.50 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
Logistics data: 4 pcs/ctn, 17.50 kg gross, 38.5 x 32 x 16.5 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 5001859590 fit?
5001859590 fits iveco engines. It is a IVECO application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 5001859590?
5001859590 interchanges with 504201935, 504361543, 5801931331, 926371, 99460305, 99483937. All of these refer to the same water pump assembly.
How much does the 5001859590 water pump weigh?
One pump weighs 3.88 kg net. A full carton of 4 pieces comes to 17.50 kg gross.
What should I check before replacing the 5001859590 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.