Cummins water pump
- Interchanges
- 3964792 · 3973116 +6
- Engine
- PC350-8
Photos of the actual unit — the same pump we measure and pack.
5291444 belongs to the Cummins cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 2882044, 3959582, 3973115, 4309344NX, 4376357 and 6 more.
This pump was designed for PC300-8; Komatsu 360-8.
Any engine on this list takes our replacement as a straight swap.
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
| Parameter | Value |
|---|---|
| OE number | 5291444 |
| Fits brand | Cummins |
| TO Belt pulley height | 91.9 |
| TO Impeller height Ⅱ | 36.4 |
| TO Shaft head height | 102.38 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Pulley Diameter | 96 |
| Included Component 1 | O115X3.5 |
| Net weight | 4.00 kg |
| Packing | 4 pcs/ctn, 18.00 kg gross |
Logistics data: 4 pcs/ctn, 18.00 kg gross, 41 x 36 x 19.5 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 5291444 fit?
5291444 fits PC300-8 and Komatsu 360-8 engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 5291444?
5291444 interchanges with 2882044, 3959582, 3973115, 4309344NX, 4376357, 4955529NX and 5 more. All of these refer to the same water pump assembly.
How much does the 5291444 water pump weigh?
One pump weighs 4.00 kg net. A full carton of 4 pieces comes to 18.00 kg gross.
What should I check before replacing the 5291444 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.