Mercedes Benz water pump
- Interchanges
- A4702000101 · A4702000301 +6
- Engine
- —
Photos of the actual unit — the same pump we measure and pack.
541 200 0101 belongs to the Mercedes Benz cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 541 200 1101, 541 200 1201.
You will find this pump on MERCEDES ACTORS MP1 /2 /3.EVOBUS.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 541 200 0101 |
| Fits brand | Mercedes Benz |
| TO Impeller height Ⅱ | 20.7 |
| TO Shaft head height | 100.5 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 6-M8 |
| TO Flange height | 91.5 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O67X4-1 |
| Net weight | 10.58 kg |
| Packing | 1 pcs/ctn, 12.58 kg gross |
Depending on the catalog you use, the same pump shows up as:
Logistics data: 1 pcs/ctn, 12.58 kg gross, 38 x 30 x 27 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 541 200 0101 fit?
541 200 0101 fits MERCEDES ACTORS MP1 /2 /3.EVOBUS engines. It is a Mercedes Benz application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 541 200 0101?
541 200 0101 interchanges with 541 200 1101, 541 200 1201. All of these refer to the same water pump assembly.
How much does the 541 200 0101 water pump weigh?
One pump weighs 10.58 kg net. A full carton of 1 piece comes to 12.58 kg gross.
What should I check before replacing the 541 200 0101 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.