Komatsu water pump
- Interchanges
- 6205-61-1202 · 6206-61-1100 +2
- Engine
- S6D95
Photos of the actual unit — the same pump we measure and pack.
Looking for 6110-63-1110? It is the Komatsu OE reference for a cooling water pump. The replacement we supply keeps the OE fit and pulley dimensions. Net weight 12.00 kg, packed 1 per carton.
This pump was designed for 4D120; S4D120.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 6110-63-1110 |
| Fits brand | Komatsu |
| TO Belt pulley height | 193.7 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 1.9 |
| Impeller Diameter | 125 |
| Pulley Diameter | 130 |
| Belt pulley thread | 6-M10 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 12.00 kg |
| Packing | 1 pcs/ctn, 14.00 kg gross |
Depending on the catalog you use, the same pump shows up as:
Each pump is packed individually; a master carton holds 1 piece at 14.00 kg gross.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 6110-63-1110 fit?
6110-63-1110 fits 4D120 and S4D120 engines. It is a Komatsu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 6110-63-1110?
6110-63-1110 interchanges with 6110-63-1111. All of these refer to the same water pump assembly.
How much does the 6110-63-1110 water pump weigh?
One pump weighs 12.00 kg net. A full carton of 1 piece comes to 14.00 kg gross.
What should I check before replacing the 6110-63-1110 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.