Komatsu water pump
- Interchanges
- 6150-61-1101 · 6151-61-1101 +2
- Engine
- S6D125
Photos of the actual unit — the same pump we measure and pack.
6127-61-1008 is the Komatsu OE reference for this cooling water pump. One pump weighs 32.50 kg net; match the number against your old pump or parts book before ordering.
You will find this pump on SA6D155; D355C1.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 6127-61-1008 |
| Fits brand | Komatsu |
| TO Shaft head height | 77.7 |
| Mounting hole position | Aligned to OE mounting points |
| TO Gear height | 48.8 |
| TO Impeller height Ⅰ | 13.3 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 23 |
| Net weight | 32.50 kg |
| Packing | 1 pcs/ctn, 34.50 kg gross |
Logistics data: 1 pcs/ctn, 34.50 kg gross, 60 x 30 x 28 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 6127-61-1008 fit?
6127-61-1008 fits SA6D155 and D355C1 engines. It is a Komatsu application water pump, and our aftermarket unit replaces it directly.
How much does the 6127-61-1008 water pump weigh?
One pump weighs 32.50 kg net. A full carton of 1 piece comes to 34.50 kg gross.
What should I check before replacing the 6127-61-1008 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 6127-61-1008 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.